Original price was: RM33.99.RM25.99Current price is: RM25.99.
The term “Disposable Convert Prefilled Cartridge 10K Puffs” refers to a disposable vape device equipped with a replaceable, prefilled cartridge system. Although designed for single-unit usage, it allows users to convert or reuse the main body by swapping out prefilled pods. With up to 10,000 puffs, this format offers both convenience and affordability, perfect for those who prefer long-lasting vaping sessions.
• Rapid Global and Regional Market Growth
According to Grand View Research, the global e-cigarette market reached approximately USD 28.17 billion in 2023 and is expected to grow at a CAGR of 30.6% until 2030. This includes various categories like disposables and rechargeable prefilled systems.
The prefilled cartridge segment alone is also growing fast, estimated to hit USD 1.81 billion in 2024 and expected to grow to USD 6 billion by 2030, with a CAGR of 22.2%.
• Consumer Pain Points & Solutions
Convenience: Unlike traditional disposables, the convertible 10K system allows for cartridge replacement without replacing the entire device.
Cost Efficiency: While the upfront cost may be slightly higher, the long-term cost per puff is much lower—especially suitable for heavy users.
Eco-Friendly: Traditional disposables generate large volumes of battery and plastic waste. Prefilled convertibles greatly reduce environmental impact.
Titan X 10K Convertible Cartridge Kit
Available in the UK, this kit includes a rechargeable USB-C device with 3–4 prefilled pods. Ideal for moderate to heavy users.
OXBAR Maze Pro 10K
Features adjustable wattage and airflow with easy pod replacements and 10,000 puff capacity.
Modus × Kado Bar KB10000
Packs 18ml of e-liquid, 650mAh battery, swappable pods, and up to 50mg nicotine—powerful and versatile.
Juice Head Maxx 10K
The brand’s first ultra-long-lasting disposable with 20ml juice, digital screen, and rechargeable battery.
Other Notable Options:
Raz TN9000: A stylish 9,000-puff device with HD screen and adjustable airflow.
Oxb AR X G-8000: Offers 8,000 puffs with prefilled cartridge compatibility.
Battery Life: Confirm if “10K puffs” is realistic by comparing battery size (650–1000mAh) and juice capacity (18–20ml).
Refillable Cartridge System: Look for devices that support easy click-to-replace or slide-style pod mechanisms.
Charging: USB-C fast charging is essential to prevent premature battery disposal.
Flavor & Nicotine Strength: Typically ranges from 20–50mg salt nic. Choose suitable strength and flavor diversity.
Safety & Compliance: Always choose certified brands with solid manufacturing reputations.
If you’re focused on cost-performance and heavy usage, Titan X and Modus × Kado KB10000 are ideal choices.
If you value advanced features like screens and high-end design, Juice Head Maxx 10K or Raz TN9000 are worth considering.
For those who want full control over airflow and rich flavor options, all of the above meet expectations.
High-capacity prefilled closed cartridge devices—commonly designated as 10,000 Puff (10K) Prefilled Pod Systems—represent the current pinnacle of high-volume disposable and closed-pod vaping architecture. Typically engineered with integrated high-capacity e-liquid reservoirs (12mL to 20mL), rechargeable lithium-ion battery cells, integrated mesh heating elements, and smart LED/chipset monitoring, these devices are commercially sold as single-use or proprietary closed-system cartridges.
Converting a closed, prefilled 10K puff cartridge system into a refillable, reusable open pod system extends hardware utility, drastically reduces e-waste, lowers long-term cost per milliliter, and permits custom e-liquid profiling. This technical masterclass details the engineering architecture, modification mechanics, fluid dynamics, battery safety protocols, and operational procedures required to convert closed 10K puff cartridges into sustainable, open-system hardware.
To modify or convert a 10K puff prefilled cartridge without compromising structural integrity or electrical safety, one must first understand its internal mechanical engineering.
10K PUFF PREFILLED POD ARCHITECTURE SCHEMATIC
┌────────────────────────────────────────────────────────────────────────┐
│ PCTG MOLDED HOUSING │
│ ┌──────────────────────────────────────────────────────────────────┐ │
│ │ PRIMARY E-LIQUID RESERVOIR (12 - 18mL) │ │
│ └──────────────────────────────┬───────────────────────────────────┘ │
│ │ Liquid Feeder Channels / Valves │
│ ┌──────────────────────────────┴───────────────────────────────────┐ │
│ │ SATURATED POLY-FILL / ABSORPTION CHAMBER │ │
│ └──────────────────────────────┬───────────────────────────────────┘ │
│ │ Capillary Feed │
│ ┌──────────────────────────────┴───────────────────────────────────┐ │
│ │ HEATING CORE: Mesh Element (0.6Ω - 1.0Ω) + Organic Cotton │ │
│ └──────────────────────────────┬───────────────────────────────────┘ │
│ │ Airflow Chimney Passage │
└─────────────────────────────────┼──────────────────────────────────────┘
│
┌─────────────────────────────────┴──────────────────────────────────────┐
│ BASE INTERFACE & ELECTRONICS │
│ [Silicone Seal Gasket] [Airflow Sensor] [Base Contact Pins] [Magnet]│
└────────────────────────────────────────────────────────────────────────┘
Manufacturers define a “puff” as a standard automated draw lasting between 1.2 to 1.5 seconds at a fixed wattage (typically 10W to 14W).
The mathematical relationship governing total liquid displacement ($V_{total}$) to puff count ($N_{puffs}$) is expressed as:
Where $\bar{v}_{puff}$ represents the average mass/volume of e-liquid aerosolized per puff (typically $0.0015\text{ mL}$ to $0.0020\text{ mL}$ under standard 11W conditions).
For a true 10,000-puff delivery yield:
Hence, a standard 10K puff cartridge houses between 14.0mL and 18.0mL of e-liquid, distributed either within a direct liquid chamber or a hybrid chamber featuring an inner poly-fill storage matrix coupled to a localized mesh wicking core.
Converting a closed factory-sealed PCTG cartridge into an open, refillable system requires precise tools to prevent housing fractures, air leaks, or battery short-circuits.
+───────────────────────────────+───────────────────────────────────────+───────────────────────────────────────────+
| Tool / Material | Specification Grade | Technical Application |
+───────────────────────────────+───────────────────────────────────────+───────────────────────────────────────────+
| **Micro Precision Drill** | Hand-pin vise with 1.5mm–2.5mm bits | Creating smooth refill access ports |
| **Blunt-Tip Syringes** | 14G to 18G Stainless Steel Needles | High-viscosity e-liquid extraction/fill |
| **Food-Grade Silicone Plugs** | High-temp Medical Grade (1.8mm-2.5mm) | Airtight sealing of custom refill ports |
| **Ultrasonic Cleaner** | 42kHz Industrial Transducer | Purging residual factory juice and debris |
| **Digital Multimeter** | DC Voltage / Resistance Ω Auto-range | Testing coil integrity & battery output |
| **Isopropanol (IPA)** | 99.9% Anhydrous Grade | Cleaning contacts, PCB, and casing |
+───────────────────────────────+───────────────────────────────────────+───────────────────────────────────────────+
Modifying a closed prefilled 10K cartridge involves five core phases: Structural Housing Separation, Port Precision Drilling, Flush Purging, Liquid Refilling, and Pressure-Seal Re-Assembly.
CONVERSION PROCESS FLOWCHART
┌───────────────────────┐ ┌───────────────────────┐ ┌───────────────────────┐
│ PHASE 1: HOUSING │ ───► │ PHASE 2: PRECISION │ ───► │ PHASE 3: ULTRASONIC │
│ DISASSEMBLY │ │ PORT DRILLING │ │ FLUSH & CLEANING │
└───────────────────────┘ └───────────────────────┘ └───────────────────────┘
│
┌───────────────────────┐ ┌───────────────────────┐ │
│ PHASE 5: VACUUM SEAL │ ◄─── │ PHASE 4: E-LIQUID │ ◄────────────────┘
│ & LEAK TESTING │ │ REFILL & PRIMING │
└───────────────────────┘ └───────────────────────┘
Locate Ultrasonic Weld Seams: Most 10K cartridges are joined at the base boundary using ultrasonic plastic welding or high-friction snap-latches.
Apply Controlled Torsional Pressure: Using plastic pry tools, gently lever the base cap away from the main outer PCTG wall. Do not use metal blades directly against the airflow sensor area, as this can slice internal silicone gaskets.
Extract Base Assembly: Carefully pull the base block out. Ensure the tiny insulated red/black gauge wires (if connected to a smart screen PCB) are not snapped under tension.
Identify Ideal Drill Zone: Select a flat section on the upper side or top surface of the cartridge chamber away from the central metal airflow chimney.
Pin Vise Drilling: Use a 1.5mm micro drill bit held perpendicular to the housing wall. Slowly rotate the hand pin vise to bore through the PCTG wall.
Critical Warning: Never use a high-speed power drill. Frictional heat will melt PCTG plastic, introducing micro-plastic debris into the internal chamber.
Deburr Port Edges: Ream the drilled hole using a 2.0mm bit to create a chamfered shoulder for the silicone plug seal.
DRILLING PORT SELECTION ARCHITECTURE
CORRECT: Upper Chamber Wall INCORRECT: Center Chimney
┌───────────────────┐ ┌───────────────────┐
│ ┌───┐ ┌───┐ │ │ ┌───┐ [DRILL] ───┼───► Damaged
[DRILL]─┼─►│ │ │ │ │ │ │ │ │ │ │ Chimney
│ │ │ Air │ │ │ │ │ │ Air│ │ │ │ Passage
│ │ │Chamber│ │ │ │ │ │Chamb│ │ │ │
│ └───┘ └───┘ │ │ └───┘ └───┘ │
└───────────────────┘ └───────────────────┘
Extract Old E-liquid: Insert an 18G blunt-tip syringe through the drilled port down to the bottom wall. Vacuum-extract all remaining factory e-liquid.
USP Solvent Flush: Inject 5mL of pure USP-grade Propylene Glycol (PG) into the chamber. Gently agitate to dissolve factory flavorings and residual high-concentration sweeteners.
Vacuum Drain & Air Dry: Flush out the PG rinse. Allow the inner chamber to dry in a low-humidity room or desiccator chamber for 4 hours to eliminate residual moisture.
Liquid Selection: Select a high-grade e-liquid with a viscosity profile matched to the coil mesh (refer to Section 4).
Volumetric Refill: Draw $10\text{ mL}$ to $14\text{ mL}$ of fresh e-liquid into a clean syringe. Inject slowly through the refilling port, allowing air to vent simultaneously so pressure doesn’t force liquid down the central chimney.
Saturate the Core: Leave a $1.5\text{ mL}$ expansion air gap at the top of the chamber to maintain proper hydrostatic vacuum pressure.
Install Silicone Plug: Insert a food-grade silicone bung (1.8mm–2.0mm stem diameter) firmly into the drilled port.
Re-seat Base Gasket: Re-align the silicone base seals with the cartridge’s bottom contact plate. Press the base block back into the outer PCTG body until all latches snap closed.
Inverted Hydrostatic Leak Test: Stand the assembled cartridge inverted (mouthpiece down) on clean lint-free paper for 15 minutes. If no weeping occurs from the chimney or base seams, the internal vacuum seal is intact.
The internal mesh heating element inside factory prefilled 10K cartridges is calibrated for specific liquid viscosity and acid-base ratios. Choosing an incompatible refill liquid will cause either flooding/spitback or premature cotton scorching.
+───────────────────────────+───────────────────────────+───────────────────────────+───────────────────────────+
| Refill Fluid Parameter | 50VG / 50PG Formulation | 60VG / 40PG Formulation | 70VG / 30PG Formulation |
+───────────────────────────+───────────────────────────+───────────────────────────+───────────────────────────+
| **Viscosity Index (25°C)**| Low (~50-65 mPa·s) | Medium (~110-130 mPa·s) | High (~220-280 mPa·s) |
| **Wicking Action Speed** | Ultra-Fast (1.0 - 1.5s) | Balanced (2.0 - 3.0s) | Slow (4.5 - 6.0s) |
| **Best Coil Resistance** | 0.8Ω - 1.2Ω Mesh | 0.6Ω - 0.8Ω Mesh | Sub-Ohm (<0.4Ω Mesh Only) |
| **Risk Factor** | Potential Flood if worn | Ideal Target Balance | Dry Hits / Burnt Wicks |
+───────────────────────────+───────────────────────────+───────────────────────────+───────────────────────────+
Nicotine Salts (Benzoic / Salicylic Acid Formulations):
pH Range: 5.0 – 6.5 (Neutralized)
Compatibility: High. Factory 10K cartridges are built for low-pH salt formulations (20mg/mL–50mg/mL). Refilling with equivalent salt nicotine maintains smooth throat feel and consistent vapor density.
High Throat-Hit Pod Compatible (HTPC):
pH Range: 7.2 – 7.8
Compatibility: Moderate to High. HTPC uses 12mg/mL to 22mg/mL freebase/salt hybrids in a 50/50 base. Provides a strong throat hit at low wattage (11W–14W) while preserving mesh coil life.
Standard Freebase Nicotine:
pH Range: 8.0 – 9.0 (Alkaline)
Compatibility: Low to Moderate. Freebase nicotine above 12mg/mL can feel overly harsh on a warm mesh coil. Stick to 3mg/mL to 6mg/mL if using standard freebase.
Commercial prefilled liquids use high concentrations of micronized sucralose (1.5% to 3.0%). When converting a cartridge for extended reuse, select clean, low-sweetener (<0.5% sucralose) e-liquids. This prevents carbon deposits from building up on the mesh wire surface, extending coil life through multiple refill cycles.
Most 10K puff systems consist of two primary parts: a prefilled cartridge and a reusable base housing containing a 3.7V rechargeable lithium-ion/polymer cell (500mAh to 850mAh) and a smart control chipset.
10K PUFF BASE ELECTRONICS SCHEMATIC
┌────────────────────────────────────────────────────────────────────────┐
│ SMART CONTROL CHIPSET (MCU) │
│ │
│ ┌──────────────┐ ┌──────────────┐ ┌──────────────┐ ┌──────────┐ │
│ │ Charging IC │ │ Puff Counter │ │ MOSFET Power │ │ OLED/LED │ │
│ │ (TP4056/TypeC)│ │ Microcode │ │ Switch Gate │ │ Display │ │
│ └──────┬───────┘ └──────┬───────┘ └──────┬───────┘ └────┬─────┘ │
└─────────┼──────────────────┼──────────────────┼────────────────┼───────┘
│ │ │ │
┌─────────┴──────────────────┴──────────────────┴────────────────┴───────┐
│ 3.7V Li-Po CELL (500mAh - 850mAh) │
└────────────────────────────────────────────────────────────────────────┘
The charging current ($I_{charge}$) supplied by the onboard Type-C controller must be matched to the battery’s capacity ($C$) to prevent thermal runaway.
For a typical $650\text{ mAh}$ cell ($0.65\text{ Ah}$), the maximum charge rate should not exceed $1\text{C}$:
Safety Warning: Avoid using high-wattage fast chargers (e.g., 45W–100W USB-PD laptop bricks) directly on modified pod bases. Although onboard step-down circuits exist, thermal stress can degrade internal silicone insulators, leading to short circuits. Use a standard 5V / 1A (5W) power source.
Modern 10K systems feature microcontrollers that track accumulated usage using two primary methods:
+───────────────────────────+───────────────────────────────────────────+───────────────────────────────────────────+
| Counter Tracking Method | Operational Mechanics | Bypass / Reset Procedure |
+───────────────────────────+───────────────────────────────────────────+───────────────────────────────────────────+
| **Timed Draw Microcode** | Chip aggregates total firing duration | Hard-disconnect battery lead for 30s; |
| | (e.g., 10,000 puffs × 1.2s = 12,000s). | bridge MCU reset pin (RST) to GND. |
| **Resistance Delta Log** | Measures slight increases in coil | Pulse-fire a fresh 0.8Ω dummy coil load |
| | resistance as cotton dry-bakes. | to re-calibrate chip baseline resistance. |
+───────────────────────────+───────────────────────────────────────────+───────────────────────────────────────────+
When converting a 10K cartridge for long-term use, the factory heating core may eventually suffer from wick breakdown or carbon accumulation.
MESH HEATING CORE & COTTON WRAP ASSEMBLY
┌───────────────────────────────────┐
│ OUTER PERFORATED STAINLESS TUBE│
│ ┌─────────────────────────────┐ │
│ │ NON-WOVEN COTTON PAD WRAP │ │
│ │ ┌───────────────────────┐ │ │
│ │ │ KANTHAL A1 MESH STRIP │ │ │
│ │ │ (0.6Ω - 0.8Ω) │ │ │
AIR INLET ────►│ │ │ ┌─────────────────┐ │ │ ├───► VAPOR OUTPUT
│ │ │ │ AIR CHIMNEY CORE│ │ │ │
│ │ │ └─────────────────┘ │ │ │
│ │ └───────────────────────┘ │ │
│ └─────────────────────────────┘ │
└───────────────────────────────────┘
Mesh Wire Material: Kanthal A1 or Ni80 Honeycomb Mesh.
Mesh Dimensions: $18\text{mm} \times 5\text{mm}$ strip footprint.
Resistance Target: $0.6\Omega$ to $0.8\Omega$.
Wicking Media: Highly absorbent Japanese Organic Unbleached Cotton sheet, shaved to a uniform thickness of $1.2\text{mm}$.
Extract Core Assembly: Use needle-nose pliers to remove the bottom stainless steel coil casing from the base of the cartridge.
Remove Old Cotton & Mesh: Slide out the burnt cotton pad and degraded mesh strip.
Dry Burn Mesh: Gently pulse the raw mesh strip at low power ($5\text{W} – 8\text{W}$) using an external test bench to burn off oxidation.
Wrap & Re-seat: Wrap a fresh $1.2\text{mm}$ organic cotton strip around the mesh element. Slide the assembly back into the perforated housing tube, ensuring the dual contact legs extend cleanly through the lower silicone insulating grommet.
+─────────────────────────────+─────────────────────────────+─────────────────────────────+─────────────────────────────+
| Performance Parameter | Factory Prefilled 10K Pod | Converted Open 10K Pod | Standard Refillable Pod |
| | (Unmodified Closed System) | (Modified System) | (e.g., Vaporesso / OXVA) |
+─────────────────────────────+─────────────────────────────+─────────────────────────────+─────────────────────────────+
| **E-Liquid Yield Capacity** | 12mL – 18mL (Single Use) | 50mL – 100mL (Multi-Refill) | 2mL – 3mL Per Fill (Infinite)|
| **Cost Per 10mL Juice** | High ($15.00 – $25.00 equivalent)| Extremely Low ($2.00 – $4.00) | Low ($3.00 – $5.00) |
| **Flavor Flexibility** | Single Factory Flavor | Infinite Custom Flavors | Infinite Custom Flavors |
| **Hardware E-Waste Footprint| High (Disposable Shell) | Low (Extended Use Shell) | Very Low (Replaceable Pod) |
| **Leak-Resistance Rating** | High (Factory Vacuum) | Moderate (Requires Care) | Extremely High (Factory Open)|
| **Coil Replaceability** | Non-Replaceable | Re-wickable with Tools | Plug-and-Play Swappable |
+─────────────────────────────+─────────────────────────────+─────────────────────────────+─────────────────────────────+
Modifying closed electronic nicotine delivery systems (ENDS) involves working with structural plastics, lithium-ion battery cells, and concentrated liquids.
SAFETY HAZARD ASSESSMENT
HAZARD TYPE PRIMARY CAUSE PREVENTION PROTOCOL
┌─────────────────────────┐ ┌─────────────────────────┐ ┌───────────────────────────────────┐
│ Thermal Runaway / │ │ High-wattage fast │ │ Charge strictly via 5V/1A power │
│ Li-ion Fire │ │ charging or damaged PCB │ │ source; inspect cell insulation. │
└─────────────────────────┘ └─────────────────────────┘ └───────────────────────────────────┘
┌─────────────────────────┐ ┌─────────────────────────┐ ┌───────────────────────────────────┐
│ Toxic Carbon Monoxide / │ │ Firing dry, degraded │ │ Maintain liquid level above ports;│
│ Acrolein Production │ │ cotton wicks │ │ do not operate on burnt wicks. │
└─────────────────────────┘ └─────────────────────────┘ └───────────────────────────────────┘
┌─────────────────────────┐ ┌─────────────────────────┐ ┌───────────────────────────────────┐
│ Microplastic Particle │ │ High-speed power drill │ │ Hand drill exclusively using a │
│ Inhalation │ │ melting PCTG housing │ │ pin vise; flush chamber thoroughly│
└─────────────────────────┘ └─────────────────────────┘ └───────────────────────────────────┘
TROUBLESHOOTING FLOWCHART
Symptom Detected
│
┌──────────────────────────┼──────────────────────────┐
▼ ▼ ▼
CARTRIDGE LEAKING BURNT HIT / DRY DEVICE NOT FIRING
│ │ │
┌─────────┴─────────┐ ┌─────────┴─────────┐ ┌─────────┴─────────┐
▼ ▼ ▼ ▼ ▼ ▼
Silicone plug Hydrostatic E-liquid too thick Wattage too Puff counter sensor Base contacts
unseated vacuum lost (>70% VG) high locked out oxidized/wet
│ │ │ │ │ │
▼ ▼ ▼ ▼ ▼ ▼
Re-seat plug Ensure 1.5mL Switch to 50/50 Lower power Perform hard reset Clean contacts
firmly into port air gap at top PG/VG ratio to 11W-14W (Disconnect cell) with 99% IPA
+───────────────────────────────+───────────────────────────────+───────────────────────────────────────────────+
| Observed Symptom | Root Mechanical Cause | Corrective Operational Action |
+───────────────────────────────+───────────────────────────────+───────────────────────────────────────────────+
| **Gurgling / Juice Inhalation**| Chamber flooded due to lost | Remove cartridge, flip upside-down, and blow |
| | internal vacuum pressure. | forcefully through airflow base into a paper towel.|
| **Muted Flavor / Low Vapor** | Carbon buildup on mesh element| Perform PG solvent flush; if ineffective, |
| | or power cell undervoltage. | re-wick core mesh or charge cell at 5V/1A. |
| **Auto-Firing / Continuous Draw**| Airflow sensor contaminated | Disassemble base, isolate microphone sensor, |
| | with leaked e-liquid. | and flush sensor housing with 99.9% IPA. |
| **Display Shows 0% Liquid** | Software microcode lock on | Perform MCU hard reset by momentarily |
| | puff counter display circuit. | shorting reset pads on internal PCB. |
+───────────────────────────────+───────────────────────────────+───────────────────────────────────────────────+
Converting closed prefilled 10K cartridges yields clear financial savings and environmental benefits compared to repeatedly purchasing disposable products.
100,000 PUFF COST PROFILE COMPARISONThe Disposable Convert Prefilled Cartridge 10K Puffs is a next-gen fusion of disposables and pod systems—offering extended usage, cost savings, and reduced waste. Choose reputable brands from authorized sellers and always check for quality assurance and compliance certifications.
“Disposable Convert Prefilled Cartridge 10K Puffs” merujuk kepada peranti vape pakai buang yang dilengkapi dengan sistem kartrij pra-isi boleh tukar. Walaupun direka sebagai produk pakai buang, pengguna boleh menukar kartrij tanpa perlu menggantikan keseluruhan peranti. Dengan sehingga 10,000 sedutan, ia memberikan keseimbangan antara kemudahan dan penjimatan, sangat sesuai untuk pengguna yang mahukan pengalaman vaping tahan lama.
• Pertumbuhan Pasaran Global & Tempatan yang Pesat
Menurut Grand View Research, pasaran e-rokok global telah mencapai kira-kira USD 28.17 bilion pada tahun 2023 dan dijangka berkembang pada kadar pertumbuhan tahunan (CAGR) sebanyak 30.6% sehingga 2030. Ini termasuk kategori seperti vape pakai buang, pod boleh cas, dan kartrij pra-isi.
Segmen kartrij pra-isi sahaja dijangka mencapai USD 1.81 bilion pada 2024 dan meningkat kepada USD 6 bilion menjelang 2030 (CAGR 22.2%).
• Isu Pengguna & Penyelesaian
Kemudahan: Tidak seperti vape pakai buang biasa, sistem 10K ini membolehkan penukaran pod tanpa perlu membuang seluruh peranti.
Penjimatan Kos: Harga awal mungkin lebih tinggi sedikit, tetapi kos per sedutan jauh lebih rendah—terutamanya untuk pengguna tegar.
Mesra Alam: Peranti pakai buang menghasilkan banyak sisa bateri dan plastik. Reka bentuk kartrij boleh tukar membantu kurangkan pencemaran.
Titan X 10K Convertible Cartridge Kit
Popular di UK, set ini termasuk peranti boleh cas USB-C dengan 3–4 pod pra-isi. Sesuai untuk pengguna sederhana hingga berat.
OXBAR Maze Pro 10K
Menawarkan kuasa dan aliran udara boleh laras dengan kapasiti 10,000 sedutan dan pod mudah tukar.
Modus × Kado Bar KB10000
Mengandungi 18ml e-liquid, bateri 650mAh, pod boleh tukar, dan kepekatan nikotin sehingga 50mg—prestasi tinggi dan mantap.
Juice Head Maxx 10K
Peranti pakai buang pertama dari Juice Head dengan 20ml e-liquid, skrin digital, dan bateri boleh cas semula.
Jenama Baru Menarik:
Raz TN9000: Reka bentuk menarik dengan 9,000 sedutan, skrin HD, dan aliran udara boleh laras.
Oxb AR X G-8000: Versi 8,000 sedutan yang juga menyokong kartrij pra-isi.
Hayat Bateri: Pastikan label “10K puffs” sahih dengan memeriksa kapasiti bateri (contoh 650–1000mAh) dan kandungan e-liquid (18–20ml).
Reka Bentuk Pod Tukar: Pilih sistem tukar mudah seperti tekan-salin atau gelungsur, elak buang seluruh peranti.
Kemudahan Pengecasan: USB-C pengecas pantas adalah wajib untuk guna semula tanpa buang bateri.
Perisa & Kekuatan Nikotin: Biasanya antara 20–50mg nikotin garam. Pilih kepekatan dan perisa mengikut kesesuaian anda.
Keselamatan & Pematuhan: Sentiasa pilih jenama yang diiktiraf dengan kawalan kualiti yang ketat.
Jika anda mengutamakan nilai & penggunaan berat, Titan X dan Modus × Kado KB10000 ialah pilihan terbaik.
Jika anda suka teknologi moden dengan paparan skrin, Juice Head Maxx 10K atau Raz TN9000 sangat disyorkan.
Untuk kawalan aliran udara dan variasi perisa, semua model di atas boleh memenuhi keperluan anda.
Disposable Convert Prefilled Cartridge 10K Puffs ialah inovasi terkini yang menggabungkan kelebihan vape pakai buang dan pod sistem. Ia memanjangkan hayat penggunaan, menjimatkan kos, dan mesra alam. Pilih jenama yang dipercayai, beli dari penjual sah, dan sentiasa semak pensijilan keselamatan produk.
“Disposable Convert Prefilled Cartridge 10K Puffs”指的是一次性使用、但具备预填式烟弹设计，可转换活用烟弹组件的电子烟产品，标注“10K”（10,000次吸）续航。它兼顾了免充填的便利性与换弹的经济性，满足对长时间吸烟体验有需求的用户。
据 Grand View Research 数据显示，全球电子烟市场在2023年达到约281.7亿美元，并将以30.6%复合年增长率增长至2030年其中包括一次性、可充电预填弹等多种细分品类。
预填式烟弹市场亦呈现快速上升态势，2024年市场规模达18.1亿美元，预计到2030年增至60亿美元，年复合增长率为22.2%
便捷性：与传统一次性电子烟不同，转换可预填式烟弹10K设备可以通过更换弹芯延长使用寿命，无需不断购入整支设备。
成本效益：虽然10K设备起售价略高，但从长期来看，每吸成本更低，尤其适合重度用户。
环保减废：一次性设备容易产生大量电池与塑胶废弃物，而预填式转换设计能有效降低废弃量
Titan X 10K Convertible Cartridge Kit
英国市场中，Titan X提供一个主机加3–4个预填烟弹组合，拥有USB‑C可充电电池，适合中到重度用户
OXBAR Maze Pro 10K
支持可调整功率和气流控制，10,000 次吸引力强，预填设计简易替换
Modus × Kado Bar KB10000
内含18ml烟油与650mAh电池，标配可换烟弹，尼古丁浓度可达50mg，性能强劲
Juice Head Maxx 10K
作为Juice Head品牌的首款超长续航一次性烟具，预填20ml烟油、配备显示屏、电池可充电
Raz TN9000：9,000 次吸的高颜值设备，HD屏幕、气流调节器
Oxb AR X G-8000：8,000 次吸版本，同样支持烟弹预填替换
续航判断：确认标注“10K puffs”是否真实，对比电池容量（如650–1000mAh）及烟油容量（如18–20ml）。
可替换烟弹设计：优选支持“一按换弹”或滑盖式设计，避免整机报废。
充电便利：USB‑C快充是标配，避免电池用完即废。
味道和尼古丁配比：通常为20–50mg盐尼古丁，要选合适尼古丁强度，同时口味丰富。
安全与法规合规：优选具备质量认证、制造商信誉良好品牌。
如果你追求性价比、重度吸烟者，Titan X、Modus × Kado KB10000 是理想之选。
若你更看重屏显与最新科技，Juice Head Maxx 10K、Raz TN9000则值得考虑。
想要气流自由调节与味道多样化，上述设备都能满足需求。
“Disposable Convert Prefilled Cartridge 10K Puffs”作为一次性与可预填烟弹融合的先进电子烟形式，不仅延长续航与降低成本，更可减少废弃电池和塑料的环境压力。建议选择知名品牌、正规渠道，并留意产品合规性与安全认证
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
CONVERT PREFILLED CARTRIDGE 10K PUFFS
PRODUCT LINK
| Weight | 0.1 kg |
|---|---|
| Dimensions | 2.5 × 2.5 × 2.5 cm |
| FLAVOUR | Sea Salt Passion Fruit, Strawberry Kiwi, Strawberry Apple, Grape Lychee, Cappucino, Berry Peach, Strawberry Peach Berries, Strawberry Yogurt, Mixed Bubblegum, Mixer Pear, Berry Slurpee, Strawberry Berries |
Original price was: RM33.99.RM25.99Current price is: RM25.99.
Reviews
There are no reviews yet.